Metal Siding Painting Advice

Painting metal and aluminum siding can become a nightmare if not done right. Over the years I have worked on and repaired many homes with metal siding. Metal siding is real common in mobile homes. Most older mobile homes use aluminum paneling for their exterior siding.

Most painted metal siding seems to last at least 20 years. The reason for this is the paint is baked on in a factory giving it a high quality and nice looking surface. This baked on method is used for painting aluminum and most metals siding that gives the product a long life.

I lived in a mobile home park for a few years and my next door neighbor's mobile home had never been painted and was over 45 years old. He would go out and washed the mobile home once a year with some TSP soap while using a brush on the end of an extension pole to clean the home.

His mobile home might not have looked brand new but it was definitely in great shape. Over the years he had developed a few scratches and some dirt that was hard to wash off but that was about the extent of the damage to the painted metal siding.

Well we painted our mobile home and used an expensive metal primer along with some expensive paint from Dunn Edwards & Co... This paint worked great. We lived there for around four years and never had any problems once the home was painted. Having been in the construction business I knew we had to use a good metal paint primer in order for the paint to stick to the baked on paint process for the metal siding to look good.

Here's my advice to you when painting metal siding.

1. Make sure the metal siding is clean. Use TSP soap along with a scrub brush and scrub that baby clean. The cleaner the metal surface the better the new paint primer will stick or adhere to the old paint.
2. Follow the instructions carefully on the paint primer can when applying the primer. Do not paint below or above the recommended paint temperatures.
3. Make sure you explain to the paint salesman at whatever store you're in that you are going to be painting metal siding. Get the right paint primer.
4. I would love to recommend a paint primer but cannot because I don't want to get a phone call from anyone a few years from now telling me the paint is peeling off of their home. Let that responsibility become the paint manufacturers.
5. Let the paint primer dry for the recommended time as per the directions on the paint primer can. I prefer letting the paint dry at least one week. The reason for this is some paint primer's stay soft for a while and if you paint over them immediately they doesn't seem to bond as good and sometimes will stay soft for a long period of time.
6. Apply your final coats of paint following the manufacturer's instructions on the paint can.

There you have it painting metal siding is all in the preparation of the surface you are painting.

Have fun painting and always read and follow the manufacturer's recommended instructions for the products you are using. These people test their products constantly and know the best way to apply them to any surface.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on different Types Of House Siding

Painting Metal Siding
Tile

Handy Man Talents - Remodeling Tips

Do you pride your self as a competent handy man? Lets face it, there are many women who just love guys who can turn their hand to just about anything around the house. But it's not enough to be "just" a handy man, to be a well rounded in demand handy man you need to develop many different sets of skills.

Some people just like to do small handy jobs using timber, perhaps doing repairs to door jambs - window sashes & frames or repair a few rotten floorboards, and believe it or not the vast army of people working as handy men never seem to run out of work.

Perhaps instead of promoting your services as an all round handy man, you could specialise and concentrate your skills in certain areas, such as woodwork repair - fence repairs - household utensil repairs - garden furniture repairs - garden equipment & tool repair, there is an almost endless list that could be compiled in the general handy man arena.

But just imagine if you made a special effort and went a little further
than the average handy man does with his skills, and included special metal craft skills that placed you into a position that few other people were able to offer in your area, now wouldn't that give you a competitive advantage.

Tools - equipment & other things break all of the time around a house, the simple solution is to simply throw broken items out, and that is what most people do, and one of the major reasons why so much stuff ends up in landfill refuse dumps. Many of these broken items could easily be repaired and put back into service once more, people will save money and landfills will end up with a lot less material & things being dumped.

Metal repair skills are not difficult to learn, many trade colleges offer short courses on equipment - tool maintenance & repairs. If you are an enterprising handy man there's a good chance you already have the right kind of skills to succeed. You don't need a large inventory of tools either, a mid size electric arc welder, a sturdy bench fitted with a 4" vice, plus a hacksaw, a pedestal drill press and several other metal working tools and you are ready to go.

The piece De resistance of metal craft skills is when you have learnt and understand the art of metal casting, this is where you melt aluminium or bronze and pour the metal into a pre-made sand mould. Almost any shape can be made, castings made in the hobby workshop can range in weight from 1oz to several pounds or KG. All kinds of knobs, handles, levers, rods and flat shapes such as nameplates and plaques can be made with some practice.

There is an acute world wide shortage of people with practical skills and
know how to rebuild - repair and maintain, perhaps this is the kind of work that you would like to do either full time or part time. You only have to look in the newspaper classifieds to see that many people make a reasonable living rebuilding and repairing all manner of things.

Col Croucher

Need content? You may use this article at your website, or in your newsletter. The only requirement is inclusion of the following sentence - Article by Col Croucher of http://www.myhomefoundry.com - the definitive source for hobby metal casters of all ages. While at the web site you can download a free ebook to learn about, & understand hobby metal craft.

Do-It-Yourself Garage Floor Coating in 4 Simple Steps

Garage floors are one of the more unfortunate parts of garages along with garage roofs and garage doors. Why? They get stepped on. They get greased on. They get dumped on hard. Abused, misused and often mistreated, garage floors depreciate faster than monetary units in third world countries on a bad day.

How can a garage homeowner reform himself and start paying heed to a battered garage floor screaming for immediate attention?

Step 1: Do your homework. Gather the materials as well as the protective gears and proper tools and equipment you will need for the garage floor renovation. You will need several materials such as rubber gloves, working goggles, brush, paint tray, medium-sized paint roller, extension handle for paint rollers, concrete degreaser, concrete sealer, and an electric fan.

Step 2: Vehicle fluids, oils and grease prevent the sealer from sticking and remaining onto the concrete floor surface. Prepare your garage floor before coating by cleaning and scrubbing the concrete and ridding it of any long-standing dirt, grease and oil. Use a scrub sponge or brush and a degreaser solution. For stains and greases that are harder to remove, allow the degreaser solution to soak thoroughly onto the stain for 20-30 minutes or as recommended by the degreaser solution you are using. After soaking with the degreaser, hose down the floor with clean water.

Step 3: Allow the concrete floor garage to dry. Once your concrete is dry, you may proceed with the coating. It is important to read the coating instructions of the garage floor coating. Test a small floor area of your garage with a flat paintbrush first before applying to the whole garage floor. This way, you will be able to test and achieve the desired result.

Step 4: Once you have the result you want based on your test coating, you may proceed with coating the entire garage floor, section by section using your medium size paint roller and paint tray. Do not forget to wear the proper safety and protective gear the entire time you are coating. Also, open the garage door or turn on an electric fan while coating your floor to air out the toxic vapors from both the degreaser and garage floor coating. These may be harmful to the lungs when inhaled.

JB Anthony is the webmaster of http://www.buildyourgarage.com To browse for affordable and quality garage floor coating, to link to garage floor coating manufacturers and other garage product manufacturers, or to read more free Do-It-Yourself Build Your Garage articles, simply log on to http://www.buildyourgarage.com

What Does a GFI Do

In your bathroom you should have a GFI electrical outlet. Most new homes or newly remodeled homes require you to have GFI electrical outlets in the kitchen. Most older kitchens do not have GFI electrical outlets. GFI stands for ground fault circuit interrupter.

Why not call it a GFCI instead of a GFI electrical outlet? Well it is called a GFCI in some instances. GFI is short and is the most common name used by most electricians and builders for this type of outlet.

GFI 's come in 15 amp and 20 amperage outlets. GFI outlets must be wired properly. Make sure you're using the proper wire size when hooking up the GFI outlet.

How do I know which size wire to use? This all depends on how far away you are running it from the electrical panel. There are charts you can use to figure this out. If you are not running the electrical wire more than 80 feet from the electrical panel you can use 12 gauge electrical wires for a 20 amp GFI. This is a general rule of thumb for most electrical house wiring.

If you're going to be using a 15 amp GFI and you are going to be less than 80 feet away from the electrical panel you can use 14 gauge electrical wires. Again this is just a general rule of thumb for most electrical house wiring.

A GFI is a light duty electrical plug used in bathrooms, kitchens and the exterior of your house. The sole purpose of the GFI is to shut the breaker off faster if there is any moisture or light load problems.

Let's say for instance you have your hair dryer plugged into the GFI outlet. The hair dryer somehow falls into the sink while it is on or plugged in. The GFI outlet will instantly shut off because of the sensitivity of the breaker inside of the plug it self.

The GFI plug has a test button and a reset button on it. If you are continually resetting the GFI you will wear it out eventually. I have had GFI plugs after resetting the button about 10 times break and no longer able to use them.

The GFI electrical plug is a great idea and if you don't have them in your bathroom or outside of your home it would be a great idea to have an electrician install them for you.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Home Building Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

San Diego Termite Damage

Garage Wall Framing Into House

Stair Tread Brackets - Remodeling Tips

Metal stair tread brackets are used instead of wood cleats and for plenty of good reasons. These often become a safety hazard over time, as the wood starts to deteriorate. Metal, will not disintegrate as fast as the wood it is normally attached to. In most cases the wood stringers and steps will suffer from wood rot or termite damage before the metal brackets become a safety problem.

Metal stair brackets, often require lag screws instead of nails or screws to attach the stair step to the stringer. These lag screws are normally an inch and a quarter for the stair treads, if they are built from 2 x materials. For example a 2 x 12 or 2 x 14 stair tread will require lag screws that will not go through the wood step. A 2 inch like screw will easily go through an inch and a half stair tread. If you're building a stairway, this will be useful information.

Some metal stair connectors have four holes on each side of the metal bracket for the lag screws, while other metal stair brackets have three holes on each side. This normally depends on the thickness of the stair tread and the use of the stairway. Public stairways will normally require the stronger stair tread connector.

During my career of building stairways, I have seen quite a few metal stair tread brackets. Some builders had custom made brackets to meet specific stair tread applications, while others used Simpson products, that are more readily available to home builders and contractors.

One of the biggest problems I have noticed, using metal stair parts is the lag screws can loosen up over time, creating a safety hazard. Warping treads, along with stair steps that split where the lag screw is located, seem to be the biggest problems associated with metal brackets. There are stair building safety codes that should be followed when building or remodeling stairways.

Staircases are normally high traffic areas and should be maintained regularly. Public stairways with high traffic areas should be maintained more often. Anyone walking up and down the stairways should notify the building owner of any problems, to prevent accidents in the future.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on building straight stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry

Metal Stairs

Ice Dams - House Remodeling Ideas

There is nothing like winter in Michigan when 12 or 14 inches of snow pile up overnight and its Saturday morning with nowhere to go. But soon there looks like an ice flow from an Antarctic glacier hanging over the edge of your house. Now you start to worry about the gutters you didn't clean last fall because the freezing temperatures came even before the leaves fell. Well good news: Full gutters do not cause ice dams!

Ice dams are caused for two reasons: Heavy snowfall and poor design, insulation and ventilation of the roof and attic of the home. When snow stacks up on the roof and temperatures remain well below freezing, the snow melts from the bottom next to your roof. The heat lost from the house through the roof causes the snow to melt and run down under the snow pack to the eves where it refreezes and starts to stack up and hang over the edge. Water will pool behind this wall of ice and eventually work its way under the shingles and leak into your attic, through your ceilings and even down the walls into the basement! During the winter your gutters are filled with snow and ice and do not drain at all. Many people experience water in the basement when we have a sudden rain in the winter before their gutters have a chance to thaw. The water runs right off the roof, over the gutters and drains down the basement walls.

Many houses were built over the years with short eves, or that portion of the roof that overhangs the wall. Some houses have no eves at all! This type of design does not allow for much soffit ventilation. Look under the eves to see if you have grates or vents installed. Generally the more you have the better. These vents let cold air get sucked into the attic by the warm air heated because of poor insulation in your attic. This air is then vented through roof can or ridge vents. Now look at the roof of your house. How many can vents do you see? A ridge vent instead looks like very thick shingles along the peak of the roof. "Can" style vents are now being thought as better than ridge vents that have been popular recently.

So here are two things you can do to lessen the impact of ice dams: First, check your attic insulation. This is not complex work but very demanding physically. You'll have to be able to crawl and scoot your way around the attic without putting your foot through the ceiling. Lay the rolled, bat or loose insulation carefully but do not block the soffit vents from the inside! Go into the attic and turn off the lights and you should be able to locate the vents by the light coming up through the grates. Wear protective clothing and a breathing mask. Second, increase the number of soffit vents under the eves. This may be a job for a contractor and is not that expensive considering the utility costs you'll save.

So OK, you'll get to that insulation and venting thing ASAP but you have water dripping trough the ceilings now. You need to act right away: First, drill or push a sharp tool through the ceiling where ever you see water stains. This will drain water into a bucket and decrease the amount of damage to the ceiling. The small hole can be patched latter and touched up with paint. Next get some calcium chloride to put on the roof. (Calcium chloride is a salt that will not damage your shingles and be easier on the plants below) Spread the calcium along the top of the ice dam concentrating it in several places to melt a "trough" to drain the water away. You can also pack panty hose with the calcium chloride and lay them across the ice dam (and no, this is not the time to make jokes about your wife's skinny legs! She's mad enough about the ceilings already)

Never go on the roof or allow anyone else to go up there; this is lunacy! Roofs are dangerous, even deadly on a warm dry day, don't take the risk! It will be a mess but throw the salt up from the ground or step ladder if necessary. Never use an ax, hammer or hatchet; this will damage the roof for sure. And never, ever use a torch! (Beyond lunacy!)

Because ice dams are caused by certain weather patterns everybody and his dog is buying snow or roof rakes after a heavy snowfall. If you are lucky enough to find one of these light-weight tools at the hardware you can rake the soft snow from the roof too. This is also a good preventive measure if it can be done soon after a snowfall.

Mother Nature will have the last word but taking action now and being prepared to deal with ice dams quickly and safely will reduce much of the damage and danger to you and your home.

Frank Kalinski is a licensed builder in the State of Michigan and has run a gutter repair service for five years. Now doing home residential rental inspection for property owners he has seen many homes and how people live in them. He sees many products and designs years after construction; some things work well and some not. Simple, basic, tried and true generally last the longest and are most economical. Please visit my new web site at http://frg-s.com/

Ice Dams - House Remodeling Ideas

There is nothing like winter in Michigan when 12 or 14 inches of snow pile up overnight and its Saturday morning with nowhere to go. But soon there looks like an ice flow from an Antarctic glacier hanging over the edge of your house. Now you start to worry about the gutters you didn't clean last fall because the freezing temperatures came even before the leaves fell. Well good news: Full gutters do not cause ice dams!

Ice dams are caused for two reasons: Heavy snowfall and poor design, insulation and ventilation of the roof and attic of the home. When snow stacks up on the roof and temperatures remain well below freezing, the snow melts from the bottom next to your roof. The heat lost from the house through the roof causes the snow to melt and run down under the snow pack to the eves where it refreezes and starts to stack up and hang over the edge. Water will pool behind this wall of ice and eventually work its way under the shingles and leak into your attic, through your ceilings and even down the walls into the basement! During the winter your gutters are filled with snow and ice and do not drain at all. Many people experience water in the basement when we have a sudden rain in the winter before their gutters have a chance to thaw. The water runs right off the roof, over the gutters and drains down the basement walls.

Many houses were built over the years with short eves, or that portion of the roof that overhangs the wall. Some houses have no eves at all! This type of design does not allow for much soffit ventilation. Look under the eves to see if you have grates or vents installed. Generally the more you have the better. These vents let cold air get sucked into the attic by the warm air heated because of poor insulation in your attic. This air is then vented through roof can or ridge vents. Now look at the roof of your house. How many can vents do you see? A ridge vent instead looks like very thick shingles along the peak of the roof. "Can" style vents are now being thought as better than ridge vents that have been popular recently.

So here are two things you can do to lessen the impact of ice dams: First, check your attic insulation. This is not complex work but very demanding physically. You'll have to be able to crawl and scoot your way around the attic without putting your foot through the ceiling. Lay the rolled, bat or loose insulation carefully but do not block the soffit vents from the inside! Go into the attic and turn off the lights and you should be able to locate the vents by the light coming up through the grates. Wear protective clothing and a breathing mask. Second, increase the number of soffit vents under the eves. This may be a job for a contractor and is not that expensive considering the utility costs you'll save.

So OK, you'll get to that insulation and venting thing ASAP but you have water dripping trough the ceilings now. You need to act right away: First, drill or push a sharp tool through the ceiling where ever you see water stains. This will drain water into a bucket and decrease the amount of damage to the ceiling. The small hole can be patched latter and touched up with paint. Next get some calcium chloride to put on the roof. (Calcium chloride is a salt that will not damage your shingles and be easier on the plants below) Spread the calcium along the top of the ice dam concentrating it in several places to melt a "trough" to drain the water away. You can also pack panty hose with the calcium chloride and lay them across the ice dam (and no, this is not the time to make jokes about your wife's skinny legs! She's mad enough about the ceilings already)

Never go on the roof or allow anyone else to go up there; this is lunacy! Roofs are dangerous, even deadly on a warm dry day, don't take the risk! It will be a mess but throw the salt up from the ground or step ladder if necessary. Never use an ax, hammer or hatchet; this will damage the roof for sure. And never, ever use a torch! (Beyond lunacy!)

Because ice dams are caused by certain weather patterns everybody and his dog is buying snow or roof rakes after a heavy snowfall. If you are lucky enough to find one of these light-weight tools at the hardware you can rake the soft snow from the roof too. This is also a good preventive measure if it can be done soon after a snowfall.

Mother Nature will have the last word but taking action now and being prepared to deal with ice dams quickly and safely will reduce much of the damage and danger to you and your home.

Frank Kalinski is a licensed builder in the State of Michigan and has run a gutter repair service for five years. Now doing home residential rental inspection for property owners he has seen many homes and how people live in them. He sees many products and designs years after construction; some things work well and some not. Simple, basic, tried and true generally last the longest and are most economical. Please visit my new web site at http://frg-s.com/

DIY Bathroom Remodeling - Home Remodels

The first question you need to ask yourself when remodeling a bathroom is can you actually do the work yourself or do you have someone that can help you with the remodeling. If you don't know anyone and can't do the work yourself, I would suggest hiring a contractor with experience remodeling bathrooms.

If you can do the work yourself or think you could do the work yourself, why not give it a shot. Any experience you have in construction or home remodeling, is going to be beneficial to your bathroom remodeling project. There is plenty of information on the internet or in your local libraries on bathroom remodeling and these often prove to be great resources for do it yourselfers.

As an experienced contractor I have gathered a great deal of information through books, at work and watching local home improvement shows. The biggest problem with the show's and quite a few of these books, is they don't provide enough information. Most of the time they provide you with the basics of bathroom remodeling and you could soon find yourself in trouble or seeking the advice from a home improvement professional.

The largest benefit for doing the bathroom remodeling project yourself, could be the money you save, along with the satisfaction of completing the project. It makes homeowners feel good when they've completed a large home remodeling project, like a bathroom remodel.

If you don't have the time, lack the experience or a combination of both, I would suggest hiring a contractor to relieve you from the stress and frustration of your bath remodeling project. The more complex your bathroom remodeling project is, the greater the degree of difficulty, the longer it will take to complete the project. Some of these projects can take up a lot of your time.

If you're working on galvanized water supply pipes or old cast iron waste pipes, you could find yourself hiring a plumber to install your bathtub and fixtures. These old pipes create problems for most do it yourselfers and I would suggest hiring a professional, whenever you run into a problem you don't feel comfortable with.

Choosing to tackle some of these difficult problems yourself, could lead to water leaks and more damage to the home eventually costing you even more money than the original cost of hiring an experienced plumber in the first place. When it comes to water, structural framing and electricity, think twice, especially if you're not experienced in these areas.

My advice to do it yourselfers is to hire a professional if you're not comfortable or seek the advice from a contractor or someone with considerable experience bathroom remodeling.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping.

If your looking for some more House Remodeling Pictures or home building ideas.

Pipe Protector On 2 X 4

Rustic Feeling With Vinyl Log Siding

Love the look of a log cabin and then realize it is a major operation just to change things or blow out walls. I suggest trying vinyl log siding as an option. It looks very much like log, and gives your home that rustic feel. Vinyl log siding does not require the maintenance that real wood requires, giving you more time to enjoy your home.

No longer will you have to stain, seal or even make plan for insect prevention, because vinyl log siding is low maintenance, while still getting that wood look you desire. It is fade resistant even after years of exposure to the sun and the weather. It will never rot, splinter or corrode, in fact if you are a mother like me, not having to pick splinters out of little hands can be a real time saver. I do not want to put anything on my house or in my house that could hurt my kids.

Vinyl log siding installs as easily as any other vinyl siding and looks great up. It has absolutely no maintenance what so ever saving you lots of time and money. Some people even choose to fill it in with in with thermal insulation. I think that is a wise decision whether you live in a hot and humid climate like mine or in a colder climate. Good insulation can dramatically change your heating and cooling bills. It also stabilizes the temperature in the home, where it does not fluctuate too much.

It can range in price, but the actual product is worth the expense, which is similar or cheaper than the alternative siding, remember this type of siding is basically maintenance free. The place where you could wind up spending a lot of money is on the actual labor of putting it up. Every time I have a project around the house, I have a big barbecue and invite people over to help with the bribe of free food. What you will pay for food and drinks will not come near to what you would pay a stranger to do it and as a bonus you will be working with people you enjoy being around. It is also easy to put up if you have the right tools and a little patience. You can enjoy the look of real logs, with out the cost, hassle or maintenance, by choosing to go with vinyl log siding.

Learn more about Vinyl Log Siding

Stair Building Books and Ideas

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Floor Rim Joist Dry Rot

Is Your Real Estate Agent in a Hurry?

If any of these statements sound familiar to you, it could mean that your real estate agent is either in hurry or doesn't have an answer to your question. Either way, this could lead to an unpleasant relationship.

Have You Ever Heard the Words:

Don't Worry about a Thing, Will Take Care of You.

Come on That Roof Will Last for Another 30 Years.

I Wouldn't Worry about That, That's Easy to Fix.

How Many Times Do I Have To Tell You, It's Not a Problem.

I'm on Your Side, There Won't Be Any Problems.

With a Little Bit of Caulking, You Won't Even Notice It.

Just Plant Some Bushes in Front of It and You'll Never See It.

The Floor Squeaks, That Gives the House Character.

Or What about the Ever Famous, Are You Going to Buy the House or Not.

Are any one of these experiences familiar to you? Don't be afraid to ask your questions again. Be firm when asking, but please don't be rude and if the answers don't sound right ask someone else to verify or ask your real estate professional if they are positive and know for a fact their answer is correct. It's always good to get a second opinion anyway.

You don't need to do business with anyone that will not answer your questions and is always trying to hurry you along. If you sign a purchasing agreement with a real estate professional you're not getting along with, ask them to let you out of the contract.

With no fees of course, there are other ways to purchase a home if your now old real estate agent doesn't want to play fair.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping

If you're having problems with your real estate professional, you might give some thought to look in at some home foreclosures, and then contacting someone to help you, after you have found the home that you are looking for. Some real estate agents can be extremely unhelpful

Rainbow Remodeling

Repair Wood Shutters

Learning how to fix wood shutters can be a fun do-it-yourself project. To repair wood shutters, you need to incorporate some long term maintenance along with an understanding of what can cause them to rot. Although wood shutters can rot over time, however, many people enjoy them because they don't look like plastic and they can be installed on operable hinges. The distinct look of functional shutters that come out of the house adds a different look and type of curb appeal that vinyl shutters just don't offer. The problem is the headache that can come every 3-5 years when it's time to replace those shutters. So what can you do to get the most out of your wood shutters? Follow our tips for fixing shutters and how to repair wood shutters and exterior shutters and you will get more life out of them.

The first thing is understanding why exterior shutters can rot. The sun is your biggest enemy, because it will cause your shutters to contract and expand. If your wood shutters are painted dark colors or black and if they get direct sunlight for most of the day then this is even more so the case. Heat from the sun will cause the shutters to expand and split apart. This will expose untreated areas and the rot process will begin as water and insects make their way into the shutters through these cracks.

By maintaining your shutters, you can prolong their life. Paint your shutters every other year. Paint can fade in the sun and as that layer breaks down over time, the rot process can accelerate. You never want to put an adhesive between a shutter panel and the rails that surround it. Common mistakes are the use of caulk or glue to reinforce the panel. Panels have to have the ability to contract, expand, and shift with changing environmental temperatures. Th rails and styles are never glued to the panel for this reason and only serve to hold the panel while allowing it some slight contraction and expansion mobility. A paint contractor can often overlook this minor detail and cause more harm than good for your shutters. If your shutters are starting to split apart at the rails and panels, you need to do a couple of things. First, you should try to paint any exposed wood that's been untreated. And secondly, you should hammer the rails back in place and reinforce the rails and styles with screws. Never screw the panel to the rails or use glue or caulk.

If possible, don't use the color black. Try to avoid colors with dark pigments in them as they will absorb more heat and reduce the lifespan of the exterior shutters. You can also use a vinyl safe paint or a semi-gloss paint to help minimize absorption from the sun. If your shutters are cupping or bowing, then it's likely that the need reinforcement. Overexposure will do this and a long shutter may need a third hinge in the middle to make it more structural.

Keep in mind, that the sun is your worse enemy. If maintenance and repair are not your cup of tea, then have no fear. There is a no rot solution that does still offer the look of wood and functionality of operable shutters and they don't look like plastic. They're also not made from vinyl. What's nice about vinyl shutters is that they are affordable and they don't rot. The disadvantage is that they will always look like plastic and they too can crack and split over time. They're also not hingeable. Many people like wood shutters so that they can be hinged and function as operable shutters. You can consider upgrading to PVC shutters, which look just like wood and can be hinged. They can be an easy way to avoid a shutter maintenance nightmare. With a little bit of shutter repair and preventative maintenance you can prolong the life of your shutters so that they last twice or three times as long.

Matt Buquoi is the owner of Flower Window Boxes, a window box company that specializes in affordable no rot window boxes. They offer no rot PVC shutters that are maintenance free and operable. Visit their website for more information about their no rot shutters and window boxes.

Interior Painting - Home Tips

If you've ever moved into a new house, one of the first things you want to do is get painted in your style. Ideally you get access to the house before you move in so you can paint it all prior to the furntiure arriving. It's hard to tell which colors go with what and if you are not an interior designer, it could make sense to contact a designer or a painting company and see if you can get a color consultation.

Make sure to establish up front if you can get a free consultation or if you have to pay for their time. If you have a friend than can make a recommendation on a designer, go with that. It's always best to get a first hand account of someone skills then going blindly into the phone book and picking the first person that comes along.

If you decide on your colors, you then need to determine what type of paint is best for your walls, ceiling and trim. Some people like to use oil based paints for their look and sheen, but be careful, oil based paints can take days to cure and will leave the area smelling very strongly for a while. Most people choose water or latex based paints as they don't smell as bad as oil and you can often get a very similar and professional look for your place.

If you decide to do it yourself, make sure you have all the proper equipment, brushes, rollers, ladders and a sprayer would be great if you could get your hands on one. Alternatively you can find a contractor to take care of it, that might be your best bet if you're working a 9-5 job and have very little time left over for home improvement projects.

Choosing the right color is important, so is picking the right Interior Painter. We are a professional Seattle Home Painter and can offer you a free consultation, contact us today!

Crawl Space Access Opening

Is a House Inspection Worth It?

If you have purchased a house last year, when the market was crazy, a home inspection may not have been an option for you at the time of purchase. With multiple offers flying in on almost every property, the offers with the least conditions were sold first and this meant skipping a home inspection.

Conditions are a point or points in the Real Estate sales contract that needs to be met prior to the buyer finalizing their purchase. Common conditions are home inspections (to confirm there are no major surprises), financing conditions (to ensure the banks will finance you), and now even the condition of selling your current home. There is usually a seven to 14 day period where the buyer has to have these conditions of the sale removed and then from that point the contract is legally binding.

Without any conditions, the buyer can be in a hazardous position. If they cannot purchase the property, the seller has the legal right to sue the buyer for breach of contract. This could result in a large penalty, or even forcing the buyer to carry through with purchasing the home.

Imagine putting an offer in on a property without any home inspection conditions and then finding out from your lawyer that the home was formerly a marijuana grow operation and was never properly remediated. This is on the extreme side, but even discovering the basement was wired incorrectly and without permits could cost the new owner hundreds to even thousands of dollars.

Now with the current buyer's market occurring, where many sellers are eager to look at any offer, a home inspection should be one of the first conditions in any offer. A qualified home inspector will inspect the home from top to bottom and depending on the size of the property and scope of the inspection; this may take from a few hours to half of a day to do a thorough inspection.

Usually after the inspection it takes a couple days for the report to be finalized, although we have had some inspectors print their reports out on site. The final report will have information on the major parts of the home including, the building structure, plumbing and heating, electrical, and landscaping. Most reports even include information on the remaining life expectancy of major items such as the roof, furnace and hot water life.

Armed with this type of information you can go into the purchase of your new home with your eyes wide open. If the seller neglected to mention the furnace was on its last legs this may give you some additional bargaining power. Or if they had considered this, and priced it accordingly you can find out in advance what your costs to replace it immediately will be so you are not taken by surprise after your purchase.

Some discoveries may be so costly as to dissuade you from even removing conditions and thus saving you from purchasing the proverbial money pit. This is why the inspections are so important for a buyer.

Home inspectors can be found in the yellow pages, via referrals from friends who have recently purchased homes or if you are purchasing with a Realtor, they will have several they can usually recommend. Don't buy your next home without an inspection, it is simply too large a gamble to take with such large sums of money.

Bill Biko
http://www.investors.housez.ca
http://www.housez.ca
Helping people create wealth while they sleep through Real Estate

Framing Wood Shower Pans - Bathroom Remodeling

Whether you live in a home that has a bathtub or a shower, there is a good chance that structural framing could be damaged if there was any water leaking around the plumbing fixtures. The damage should be repaired before framing your pan.

If you're replacing a bathtub and installing a new shower this is going to require constructing a wood shower pan. Now building a wood pan will require a level floor surface, shower damn and blocking.

Now let's start with building the shower damn. You're probably wondering what is a shower damn and what does it have to do with the wood shower pan. The shower damn is actually the area you climb over when entering into the shower. This part of the shower pan enables the water to flow off a shower curtain or door into the shower pan and down the drain.

The shower damn needs to be at the least 6 inches tall and would be best if it was at least 8 inches. You can use a 4 x 6 or a 4 x 8 for the wood shower damn.

Next we need to block the perimeter of the pan area in the wall framing that we will use for our shower walls also. These blocks should be at least 12 inches high. This would require using 2 x 12 lumber for blocking.

After you block the perimeter of the shower pan and installed the shower damn you are ready to have to shower water proffed with a process known as hot mopping the shower pan or using a vinyl liner.

Well I hope this gives you a better idea of what's involved when framing shower pans during the house framing process.

Greg Vanden Berge has been building and remodeling for over 30 years and his information has proven valuable to most contractors and homeowners all over the world. He usually tries to write at least two articles a day on home improvement or remodeling problems.

Greg is in the process right now of working on a home inspection website that will revolutionize the home inspection business. He is also working on a book to help homeowners and contractors as well as other home related professions in dealing with the home inspection process.

You can visit the home inspection website currently under construction at Home Inspection Help

Home Mold Solution Books

Basic Types of Bathtubs

Bath tubs are very common luxury in bathrooms. Taking warm bath in bath tub make you feel comfortable and relaxed. People all around the world install them in their bathrooms because of relaxation and other associated benefits. Due to high demands they are now available in various designs and materials that include traditional and modern designs as well. Traditional designs have antique and beautiful look. Now day's traditional designs are available with modern touch and pattern.

Types of Bath Tubs

There are seven basic types of bath tubs available in the market.

• Clawfoot Tubs
• Pedestal Tubs
• Drop-in Tubs
• Whirlpool Tubs
• Corner Tubs
• Recessed Tubs
• Hot Tub

Clawfoot Tub

Name indicates that tub has claw or ball shaped feet. It is one of the oldest design have antique look. Basic design consists of slanted back and straight front. These tubs are normally made up of cast iron, porcelain on steel or acrylic. They do not need any specific carpentry work. It is free standing tub with uncovered pipes. Wall mounted or floor mounted faucets can be used. It also has hole for over flow and drain. Some designs also have additional holes for faucets.

Pedestal Tubs

It is a kind of freestanding oval shaped tub without feet. Material used to make base of the tub is different from exterior surface but it is treated and processed to match with material of exterior surface. Some types do not have holes for faucets. Due to this tubs will have deeper water level. Some models also have hand showers for comfortable rinsing. Towel rail can also install on one or both ends of tub. These tubs are available in porcelain, cast iron and acrylic. It is necessary to check that material used is rust free.

Drop-in Tubs

They are designed to overcome the problems related to floor mounted bathtubs such as there is always a risk to get slipped when you are taking high step to come out from the tub. Drop-in bathtubs are mounted on deck in separate frame. This type is expensive to install. Material used to make tub are light weight fiber glass, acrylic and plastic. Some designs also have faucets but designs with out faucets are also available. In such design faucets can be mounted on walls. Commonly they are installed at the corner. They are perfect for sitting and soaking feet.

Whirlpool Tubs

These tubs offer relaxing hydro massage with controlled water circulation. They are also available in different installation design such as drop in or free standing tubs. Installation requires special framing, water heaters, electrical circuits and electronically controlled speed pumps with variable speed. These tubs are available in different materials that include cast iron, fiber glass and acrylic. They are available in broad range of colors, sizes and designs.

Corner Tubs

These tubs are normally triangular in shape have one finished and two unfinished sides. They are designed to save space. They can be of any shape but two sides are backed against wall. They don't have integrated showers. Drains are present in the middle or in one corner of tub. These tubs are also available in acrylic, cast iron, porcelain and fiber glass.

Recessed tubs

These tubs are very popular because of affordability and space efficiency. They have walls on three sides and only one side has decorative finish. They are available in number of different shapes such as square, round, rectangular, diamond and heart shape. Material used to make these tubs include cast iron, porcelain, fiber glass and acrylic. Some designs have integrated faucets and some do not. Hand held shower can installed for comfortable rinsing.

Hot Tub

These are huge tubs include water heater offers relaxing hydrotherapy. Tubs have jets present on both sides i.e. inside and out side. Electric or gas heater is used to heat the water. They also have pumps, pillows and grab rails. They are available in two configurations lounger and non -lounger. Electrical work must be performed with qualified electrician. Hot tub is expensive bathroom fixture and needs more maintenance as compared to other types. Cleaning and disinfection is very necessary to avoid microbial growth in bathtub.

If you further wants to know about the different issues related to bathtubs you can visit this site http://www.theyarelocal.com/articles/home_improvement_tips/bathroom/index.php it will provide you useful information about important issues of Bathtubs.

Books on Home Building - Professional Advice

If you're a do it yourself or or a homeowner who every once in a while, once to tackle a small or large project but doesn't know where to begin, can gather useful information from home building books. I have been using these books for years and may have been worth their weight in gold.

I started my career working for my father and my father worked for his father as a Carpenter. Our job was to frame the house and we built a Lotta homes. I learned how to frame and developed some great carpentry skills from my father and working with other skilled carpenters. Over the years, if you're paying attention, even a monkey can figure out, how to assemble almost anything.

The only problem that I faced, was learning how to build the rest of the home. I would often ask questions to other building trades like plumbers, electricians, roofers and construction superintendents. Some of these people were helpful and others were not. When I was in my early 30s, I purchased my first book on home building. This book lead to other books and soon I found myself with more home building knowledge that my father.

I had about 50 books on home building and soon found myself doing large home remodels, with no formal education. I would attribute almost everything that I learned outside of house framing to books. These books have proven invaluable to me over the years and with a relatively small investment. I couldn't have spent over $200 purchasing these books but have used the knowledge from them to save myself thousands of dollars.

One $20 home building books or home repairs, can save you lots of money, if you're willing to do a little research and the labor to complete almost any home building project.

By the way, if you're interested in learning how to repair a roof, build your own house, interior decorating, structural engineering, building a deck, gathering some more information about home painting or even remodeling your bathroom. An online home building bookstore can save you money if you're willing to do the work.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a Home Buyers Guide to take some of the frustration out of home shopping

If your looking for some more home inspection or home building ideas

Modern Bathroom Lighting - Get A Contemporary Look In Your Bathroom

Lighting is more important in rooms like the bathroom and kitchen because of the practical nature of each room. For instance, the bathroom is the principal room for grooming, be it applying makeup, shaving, dealing with scratches and cuts or generally examining the body. However the bathroom also has to be a retreat to some extent, where you can shut the door on the outside world and have a bit of down time. You want to have a relaxing bath and maybe read a book or meditate on the day just gone. In this case you need lighting that is not too harsh and can be seen as soothing light. Modern bathroom lighting is a balance between these two approaches. In fact the styles of lighting are defined by their applications. There is task lighting, ambient and accent lighting. This article will explain what these terms mean and how they are used in the bathroom.

Task Lighting

Task lighting used to be about a florescent tube above the vanity mirror. This was harsh but effective in showing up the area of your face that you missed when shaving. Modern bathroom lighting has come a long way from there. Task lighting focuses on the vanity area or mirror, the bath and shower areas and even the toilet area.

In terms of the vanity area, having a light above the mirror and face will cause shadows under the eyes, nose and chin. This makes it hard to apply makeup or get that close shave because these parts of the face may be obscured. It is much better to have even lighting so adding vertical lighting on the vanity mirror or cabinet will help to an even lighting. Even better is adding a light source under the mirror.

Shower areas are normally compact and enclosed so good lighting is necessary to ensure that you can see what you are doing. This is from a safety point of view as a wet surface can cause you to slip. It is also helpful to be able to see what you are washing and even read labels on things like shampoo bottles. You may also shave in the shower so you have to be able to see what you are doing. Popular lighting for this is a recessed down lighter. This can be one light or a number of smaller lights. The light should be recessed so that it doesn't get in the way and helps to protect it from water and dampness.

Ambient Lighting

Ambient lighting is the background lighting. This is needed to fill the entire room with light so that you can move around in the room, clean it, see into storage areas and things like that. The most common form of ambient lighting is the ceiling based lighting. This has come on from the single bulb light in the center of the ceiling. Popular alternatives are the series of small down lighters that can act as ambient lighting and even task lighting, as in the shower. In terms of bathroom design, ambient lighting can also be natural sunlight that comes through a window or skylight. It is important if you are redesigning the bathroom or making a new bathroom that you take account of the where the natural light comes from so that you can place the windows in the correct position.

Accent Lighting

Accent lighting is more for creating a theme. It is used to highlight features of the room that you feel sum up it's character or style. So if you have ornaments, statues or architectural features that are original you can train a light onto it. Thus you could turn the ambient lighting off and switch the accented lighting on to create a more relaxing atmosphere. Accent lighting is useful when it has a dimmer control. The dimmer can dial the light up or down depending on your mood.

Getting the balance right between the three forms of lighting is a personal choice based on how you view your bathroom. Is it merely a place where you prepare for the day ahead, a place that you use to wind down after a hard day at work, or both.

If you want to breathe new life into your home or are simply looking for a bit of inspiration then visit http://www.finehomeideas.com. The site gives tips and advice for home renovation and interior design, including choosing bathroom furniture and rustic stone flooring for your home. Adrian Whittle gives ideas on how to make your home special.

Modular Home Construction Techniques

The truth, is that while modular homes have become more popular and can be seen dotting the landscape with far more regularity, most people are completely unfamiliar with modular home construction techniques. How is it that a modular home can be constructed so quickly and still retain their structural integrity and high over all level of quality.

Modular Home Construction Factories

By and large, modular homes are constructed indoors in a warehouse setting. In some factories some work may be done outdoors and in others the work may be done in it's entirety indoors on the factory floor.

An Assembly Line Process

They basically move down the assembly line in the same way that automobiles are built. Because modular homes are built on a steel frame and have their own wheels, they are simply pulled along to each work station by a forklift.

First Things First

It begins be constructing the steel undercarriage. This is then rolled onto the factory floor where the floor is next sheeted. After the floor is sheeted, measurements are taken and chalk lines are snapped to delineate where each wall will be placed.

The Walls are Stood in Place

In most modular home factories the walls are framed in a separate station and then brought to the modular home where they are stood and securely attached. After all the walls are attached, the plumbing, ductwork and electrical wires are all ran.

The Last Finishing Touches

Finally, the siding is applied, the finished flooring is laid down and all of the appliances and fixtures are installed. The very last thing that will be done on a modular home is a final exacting cleanup to remove any small spots and then it is given it's final inspection.

Written by Jayden Jefferson. Come over to my site to get the best articles on custom home construction plus prefabricated modular homes.

Options for Improving the State of Your Roller Shades

Roller shades have been around for many years. Long ago in history many people had roller shades installed in their windows. Some of these roller shades still look quite beautiful. However it should be understood, and expected, that by now many of these roller shades that are in windows have deteriorated and gone by the wayside. Some of the wear and tear may be quite natural, including control systems that break down or fabrics that have ripped and torn or simply don't look right anymore. In any case, for most homeowners or business owners want to have attractive window treatments in their spaces.

Among the most common problems that consumers have with roller shades are failures in the control system. Sometimes roller shades "don't want to roll up anymore." Other times, they are stuck in position. For the first of these situations, you may simply find that if you can reroll your roller shade, you can tighten the springs and have it roll up better. In the case of a shade that is stuck, you must be very careful to not damage the fabric while trying to fix the shade. Many of these situations are complete losses, meaning that you will need to replace the roller shades. This is because the older control systems, those managed by springs, are no longer the commonplace or easy to obtain shades. So in the end, if you have a shade control system that is not working properly it is often advisable to get a new roller shade with the new control system.

Many consumers ask whether they can get a new roller shade control system for their existing fabric. This would seem the most logical way of reusing the same fabric and saving money by not having to waste that same fabric on a new shade. However given the updates and new fabrics that are available on the market, as well as the new methods of manufacturing roller shades, it is not as cost-effective and easy as many would think. It may not be so much of a waste, however, to buy new roller shades. For one thing the new fabrics are technically more capable. For another, the new control systems are substantially more durable and will protect your roller shade fabric so it will last much longer in your windows.

Another common roller shade problem is ripped, warped, or otherwise damaged roller shade fabric. The heavy use of vinyl coated fabrics, those that are typically called blackout, were substantially more common in the past. Those fabrics, unfortunately the lighter weight ones, were more often susceptible to ripping than modern-day fabrics, particularly those from woven polyester or other threads. The damages to these roller shade fabrics have often created ugly or less than presentable roller shades. Many consumers have wondered if it is possible to repair this fabric by replacing a section of the fabric. Unfortunately, replacing a section of fabric is not a possibility. However, some roller shade fabrics can endure a slight repair, like sewing or other repair. Beware though, excessive sewing may lead to an expanded problem. Often times, the sewing of roller shade fabric will simply delay the inevitable- the entire destruction of their roller shade. In the end, it is usually advisable for consumers to begin thinking about replacing roller shades when this type of deterioration begins.

Some roller shades will cause damage to the surrounding area. The scraping of a roller shade bottom rail against a window frame is not uncommon. Sometimes, this bottom rail, also called a hem bar, will run into a wall or otherwise run into a window frame. This type of damage can usually be corrected by making slight changes to the bottom rail like cutting it with a saw. Sometimes this hitting into a wall is a sign of other problems. A roller shade that is not properly squared up may have other damage to the fabric at the controls at the top of the roller shade. It is important to make sure that the roller shade is rolling up properly and that there are no other damages to the fabric or the control system.

While many consumers would like to try to repair or update or otherwise renovate their roller shades, it is usually considered advisable for simple replacement of that one shade or the several with problems. The new control systems will help your shades last longer and look more beautiful for a longer period of time.

Judith Persit is a student of interior design. She started in this direction due to a search for design options in window treatments. Ms. Persit writes about roller shades. Roller shades can be interesting, you can learn more about shades at her sponsor's website, with many pictures.

Double 2 X 6 Ceiling Beam

Key Points to Consider When Selecting an Architect

Are you in the process of planning for a house renovation? Do you want to make sure that your home will be remodeled according to your discriminating taste? Are you having a hard time looking for an architect to do the entire job for you? Worry no more - use this guide to learn the best characteristics to look for in an architect.

You might be wondering, why choose an architect at all? What's in such a title that makes him quite popular and so expensive to use on a residential remodeling job? Browse along so you may find out the answers to these questions. These are facts you ought to know about the best architects and why you should hire them.

When it comes to having a major change in your own home, it is always a must to look for the best architects in your area. By doing so, you are guaranteed to get the total pleasures of your investment. But, how to go about choosing an architect? Here are the important questions to determine which one is best for you:

Reputation. This is very significant in knowing who the best architects are. Proper educational background may also help set the credibility standards of the profession. With the right architect, you do not have to worry about looking elsewhere for the persons who will work on your project. You also get to feel the importance of your decisions. They have already established their names in the business and will do nothing to harm their hard earned reputation.

Willingness to serve. Architects can be key resources to providing all that you need to have your job done on time and on budget. Customer satisfaction is certainly part of their core objectives. As you raise your queries, these experts are more than determined to impart to you their knowledge on the field. You do not have to consult other people to get an idea on how your house will look like after renovation.

Perseverance. A residential architect is always determined to get the project done. They deliver results to you in the fastest times possible. They see to it that all your requirements are met before making changes in your timeline. They also suggest what's on their minds that will add to your project, making it a masterpiece. They look into the urgency of your needs as well.

Passion. As architects, they are qualified to perform the duties as one of the most hardworking persons in the field. They pour their hearts out in everything they do. Whether it is a small room that needs updating or a large residence which needs extensive change, these professionals look into details consistently and accurately. Check to see that your architect meets these criteria when you speak with references on past jobs.

Integrity. Honesty should always form part of people in any field of expertise. When you select your architect, ask for references who will vouch for their honesty. This is the person who give you all the proper estimation on the costs that you will spend from the planning stage up to the completion of the job. They actually let you know what to expect from the entire project and how to get it done in the fastest of times.

These traits of the best architects make them one of the most sought-after professionals in the field. When you hire the right one, they will truly put their mind and soul in everything that they do. Knowing the architect will allow you to rarely find a problem once you get to know them. The best architects will allow you to participate not only during the planning stage but in the entire process.

Chuck R Stewart recently remodeled his vacation home using a Seattle architect who is a specialized Seattle residential architect.

DIY Vertical Wind Generators - Are They Worth It?

With the ever increasing need for everybody to be more careful with the environment (and in today's climate their money) have you ever thought about building your own DIY Vertical Wind Generator? These units are much like the usual wind generators except the blades are positioned vertically rather than horizontally.

It is easy to build a DIY Vertical Wind Generator from plans for normal wind generators. All that is needed is to turn the blades vertical. All the components need to build a DIY Vertical Wind Generator can be found in your local DIY store for as little as $200.

So why build a DIY Vertical Wind Generator rather than a normal wind generator? Since the blades are positioned vertically rather than horizontally you have the option of putting more blade units on the generator since there is more space. It won't necessarily generate more energy but it will allow the blades to become more sensitive to wind, allowing for power to be generated even in slight breezes; something that is not always possible with the conventional wind units.

The units can also be built to be much more compact that the usual wind turbines. This makes them ideal for people who do not have a lot of outside or roof space and can even be set up to sit on apartment balconies or outside walls. You don't even need a stand that rotates with the wind as the blades are sensitive even in a fixed position. The electronic side of setting up the DIY vertical wind generator is not all that complicated either. There are plenty of electronic blueprints out there that will show you how to set this up.

If self-sufficiency is what you are after then you will probably need at lease three to four units. If you want to ensure that you will still have power during a power outage then you will need to fit batteries to the unit. This allows electricity to be stored and be readily available to use. The downside is that these batteries can increase the cost of building the units. My suggestion would be to have a few units with batteries and the other directly connected to the grid. This would allow essential energy to be provided in cases of power outages.

DIY Vertical Wind Generators are ideal for supplying your household energy needs for a fraction of the cost of commercial units. They are easy to build and don't cost the earth.

http://www.squidoo.com/DIY-Vertical-Wind-Generator

Decks

Give Your Bathroom a Facelift Instead of Moving

Are you looking for a way to make your bathroom better? With the economy being slow, many homeowners are opting to stay in their older homes and improve them rather than buy a new house. The bathroom is the second most popular room to remodel, because we all spend so much time in there every day. Since we spend a lot of time in this little room, it's quite nice to bring some creature comforts or a touch of luxury to it, because we know we'll enjoy it everyday. Here are a couple ideas for beautifying your bathroom.

1. Invest in a great bath tub. Although this may sound a little trite at first, you'd be amazed at how soothing whirlpool tubs or clawfoot bathtubs improve your bathroom. They not only upgrade the look of your bathroom immensely, they are wonderfully soothing and relaxing space for you to take that bubble bath. Whether you choose a built in model or a free standing type of tub, an antique style or modern design, whirlpool bathtubs are a sure way to upgrade the luxury of your bathroom, and increase your enjoyment of your time there.

2. Get a bathroom vanity to match that new bathtub. You use your bathroom vanity everyday to brush your teeth, fix your hair, and put your makeup on. This is the space we make ourselves look presentable, but if we have an old vanity without enough cabinet space, cracked counters, or a peeling finish, it's time to upgrade! Go ahead and get a nice new bathroom vanity to match your snazzy new bathtub, and your bathroom will be like an entirely new space.

3. Replace the linens and towels. This may seem like a small thing, but it will make you feel like you're staying in a luxury hotel. There is nothing better than a brand new big fluffy towel to wrap up in after your whirlpool bathtub session, and it will upgrade the way your bathroom looks as well. You don't want to have a new tub and vanity installed and then keep using old ratty towels that work, but don't really look nice. Remember, you are taking on this home improvement project to make your bathroom feel like new, so go the whole nine yards and complete the makeover!

If you would like more information on whirlpool tubs or where to find clawfoot bathtubs, please visit the Simply Bathtubs website.

Materials For Stair Treads

The "Seven Deadly Sins" Home Buyers Commit

Buying a Home can sometimes seem to be a daunting task, filled with details and pitfalls. It's hard to remember everything as you are going through the process, but if you can avoid the following seven common mistakes you will come out way ahead.

1) Not Getting Pre-Qualified

This is the step you take before you even start looking at homes, and it will make your life so much easier. Start your home search by visiting a lender. They will ask specific questions about your income, bank accounts, debt, etc. and will help you determine how much home you can afford to buy. Stick within the limits they set for you and you will be much happier in future years. Their guidance is an important first step on the path to home ownership.

2) Thinking There is Only One Perfect Home For You

Buying a home is usually a process of elimination. You have a list of "must haves" and "want to haves", and "definitely don't wants". There are a limited number of homes currently for sale in the area you have chosen. Often times you can't get everything you want in one home, so you must trade-off and balance some of these "haves", "wants", and "don't wants".

New properties come on the market every day, so try to be flexible and open to new possibilities. By eliminating the homes that don't work, you get down to picking the best of the "possibles". Don't worry, you often end up finding a house that is just right for you, and you'll know it the minute you walk in.

3) Not Knowing the Total Costs Involved

When you find homes you like, ask your lender for an estimate of closing costs. This should include Title Company fees, Pre-paid expenses like taxes, insurance and pro-rated mortgage interest. Attorney fees and Homeowners Association dues may also need to be taken into account. Examine this Estimate closely and make sure you understand where each cost is coming from and whether it will be an ongoing cost after you own the home, or a one-time fee. Check the actual Closing cost statement at settlement to make sure there are no surprises.

4) Not Having a Home Inspection

Some buyers try to save a few bucks by not having a whole house inspection or by doing it themselves. Saving money today this way could end up costing you thousands in the future.

Get a qualified Home Inspector to go over the entire house, inside and out, basement and attic. His report will call out all deficiencies and suggest repairs and further action. The findings in the report may also give you leverage you can use in the negotiations with the seller.

5) Not Considering Long Term Needs

It is important to think ahead. Is your family growing? You may need more home 3-5 years from now. That "cute breakfast nook" of today will not be so cute when six people are bumping knees trying to squeeze into it. Will this home suit you in the future, or will you grow out of it.

6) Not Following Through on Due Diligence

Make a list of non-house related issues - Schools, crime rates, neighbors, traffic, power lines, new development in the area, environmental issues, etc. Ask these questions before you make any offer on a home. By getting these answers now, you'll have more confidence in your home purchase.

7) Not Buying a Home Protection Plan

This is an inexpensive short term insurance policy on the home, usually covering appliances and basic repairs for one year. It can be purchased for a small fee and will give you peace of mind about that dishwasher or water heater going bad just three weeks after you move in - every home buyers nightmare. Talk to your Realtor, they can recommend a good plan.

If you can avoid the seven common mistakes above, you'll be miles ahead, and can have peace of mind that you are making a solid, well thought out decision about the purchase of your next home. What's the old saying....."An ounce of prevention is worth a pound of cure"? Never has it been so true as in the home buying process.

Vicki Walker is a Realtor with Coldwell Banker in Davis, California. Her clients buy and sell Davis CA Real Estate and Homes She has been a Yolo County Realtor for over 12 years and enjoys writing articles about the business of Real Estate.

Painting A French Door

Hiring a Contractor For Bathroom Remodeling - Remodeling Contractors

Well here's the age old question, how do we go about finding a decent bathroom remodeling contractor.

Here's some things you will be looking for in a contractor.

1. Is Your Contractor Fair and Honest?

2. Does Your Contractor Have Experience Remodeling and Designing Bathrooms?

3. Can You Actually Find a Contractor Who Will Complete the Job in a Timely Manner?

4. Do You Think the Workers Will Be Able to Clean the Job up Daily?

5. Will the Contractor Show up on Time?

6. Is the Contractor Going to Work At Least Eight Hours a Day?

7. Does the Contractor's Crew Have Experience?

8. Is Your Contractor and His Crew Courteous?

If you find a contractor for your bathroom remodeling project that has answered yes to all questions above, hire that person immediately. Most contractors can sincerely answer yes to half of the questions above. If you're looking for the ultimate bathroom remodeling contractor, you could be searching for quite a while, you're looking for some one that is competent and you feel comfortable with.

When hiring a contractor, look for someone who has your interest in mind first and not theirs. Find someone who is willing to help with the designed process of your bathroom and the remodeling. If you find a contractor to be arrogant or controlling, there is a good chance, your bathroom might not turn out the way you envision it.

When hiring a contractor for your bathroom remodeling project or any home improvement project, the most important thing to keep in mind is, whether or not you feel comfortable with this person or not. Never hire a contractor you're not comfortable with.

If a contractor is referred to you by someone you trust, this does not guarantee you will be happy with the bathroom remodel. Most referrals that I have gotten over the years are like rolling the dice, I believe I would have done just as good picking a name out of a hat.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Stair Building Books

Where do we go to buy stair building books? Do we go to the major retailers like Amazon or Barnes & Noble? I have found over the years the information in most of these books I have purchased from these stores has a lot of fluff with very little common sense stair building application.

I bought one stair building book that had information on handrails. The front cover looked great and I thought this was going to be a great book reading the reviews from Amazon. When I finally got the book in the mail, I would say about one third of it was math tables for building elaborate wooden hand railing's. These tables were not easy to understand along with the rest of the book.

Back when I bought the book on building stair handrails it dawned on me that most of the construction workers I have met during my 30 years of working in the field were not very good outside of basic math. Now I knew a lot of carpenters that could read a measuring tape and use a framing square pretty good. But when it came to advanced geometrical construction projects like a stair hand railing system this was out of our league.

Reading this book or should I say parts of it gave me an idea to write a book of my own, starting with basic stair building I took all the fluff or the hard to understand advanced stair building applications out of my book, How to Build a Straight Set of Stairs.

I put a lot of time into creating an illustration for every possible part of building a simple set of stairs. I have probably built over 2000 sets of stairs during my lifetime and have explained and taught basic and advanced stair building to other carpenters. Understanding what parts of the stair construction process they understood, I was able to improve my skills as a stair building teacher.

Most people do not need advanced stair building skills to construct a simple straight set of stairs. If you are building a straight set of stairs and would like a stair building book with lots of easy to understand illustrations along with simplified directions you have found it.

We're building more stair building books to help contractors, carpenters, handymen and homeowners understand the stair building process.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more building stairs books and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

4 X 4 Post To Garage Header

Moisture Against Gravity - Destroying Walls

Well I'm going to start this article with a little information on a job I did once.

I had been repairing a rental house for one particular homeowner for about three years when all of a sudden I got a phone call from him telling me the rental house was destroyed and he had never seen nothing like this. He sounded so upset over the phone I told him I would meet with him immediately.

On my way to the house I was trying to get an idea in my head what the house was going to actually look like. Since I have been repairing rental properties for over 20 years at this point of my career, nothing really shocked me. I had pretty much seen everything that could possibly be done to rental property by the tenants that lived there. There is a lot to be said about taking care of it as if it were your own.

He was waiting for me at the front door and he looked thoroughly disgusted. As I approached him he was shaking his head and yelling at the same time can you believe these people, can you believe what they did to my house. I was expecting to see the front door ripped off and all the windows broken out of the house but this wasn't the case.

As he led me through the home and I could see the usual clothing on the floor, broken cabinets, a few holes in the walls and of course that awful smell of mold and mildew. All of this stuff was nothing new to me because I'm the guy they call to fix it when a renter moves out of the property.

As I entered one of the bedrooms I got my first glimpse of something I had never seen before but heard stories about and could not believe my eyes. Looking at the walls in the bedroom about 3 feet from the floor all the way around the room, the plaster was soft. It actually looks like someone shoved popcorn into the wall somehow.

The homeowner wasn't even looking at this because of the rest of the damage in the home. I started to explain to him I'd never seen nothing like this but I could guess it was water damage somehow since the plaster was soft. I could actually stick my finger into the wall, that's how soft the plaster was.

My first thought was to examine the carpeting a little closer to see if it was wet. Well it was damp but it wasn't as wet as I would've expected it to be with the amount of water in the walls. With a little more home inspecting I had found the culprit, it was a broken water bed. The water bed was now in the backyard looking innocent.

I couldn't believe a broken water bed could do this much damage so I looked around for broken or leaking water pipes and could not find any. The other bad news I had to inform the homeowner was that the water had damage the bathroom and closet walls also. These walls of course were on the other side of the bathroom walls that were damaged.

Well the point of this story is that water will actually wick its way up or worked its way up into a wall. I had to remove 4 feet of drywall all the way around the room. The plaster or drywall actually acts like a sponge pulling the water into the walls. Hard to imagine that gravity in this case seems to reverse. I would've never thought that water would've traveled so far up the walls creating that much damage.

To repair the rental property I had to remove the damaged drywall, remove the carpeting, dry the wood framing out and put the whole thing back together.

I'm still amazed and will remember that project for as long as I live.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He is currently working on more Building and Remodeling Library and adding useful content to help solve problems created by the lack of construction knowledge in the building industry.

Visit us and get more information on House Water Damage

Double 2 X 6 Ceiling Beam

Fireplace Design Ideas

Are you trying to find some inspiring information about fireplace design ideas? There are some basic elements to any fireplace that are generally addressed in turn, in order to come up with a complete fireplace design. There are three main components to any fireplace design.

The three primary components to fireplace design include the hearth, the firebox and the type of opening that is employed between the firebox and the room in which the fireplace is located. The hearth is the area outside of the firebox, in general. The firebox is the area in which the fire itself will be burned.

Hearths

Let's first talk about hearths. A hearth may be flush with the floor, raised above the floor, or sunk down lower than the floor. Additionally, there may be no hearth to speak of at all. In these cases the firebox should be at least two inches above the floor, as the hearth is what helps protect the floor from the heat of the fire.

Another type of hearth may include hearth seats of various kinds. The most traditional and popular type of fireplace with hearth seats are the kinds that feature simply two blocks on either side of the firebox opening.

Fireboxes

As with the hearth types, the different kinds of fireboxes generally have mainly to do with the height relative to the floor and / or hearth. There are raised fireboxes, flush fireboxes that are the same height as the floor, and there are dropped fireboxes that are somewhat lower than the hearth and / or floor in front of the fireplace.

Fireplace Openings

Of course the most widely utilized type of fireplace opening is the rectangular opening. Generally, a rectangular opening will be just that: rectangular in shape. However, even with rectangular openings, the sides typically flare outward from the firebox toward the face of the fireplace.

There are flat arch top openings where the sides are straight, yet the tope of the opening has a slight arch to the shape. As with the traditional rectangular opening, the sides typically flare outward from the firebox toward the face of the fireplace.

There are full arch fireplace openings where the opening contains no straight lines. These types of fireplace openings have one continuous curve all around the fireplace opening. This is the type of opening you are probably used to seeing in American Southwestern style fireplaces.

There are also corner fireplace openings that allow for there to be two open sides to the fireplace. As the name suggests, a corner opening fireplace is situated in such a way that an entire corner section of the firebox is exposed.

There are U-shaped fireplace openings where the firebox is exposed on three sides, the front, as well as the two side areas. These last two types of fireplace openings will generally produce better heat radiation. If you will be using your fireplace to heat your home, and not merely as decoration these are certainly worth looking into. For images of these various fireplace styles, take a look at http://www.fireplacesnow.com/FireplaceStyles.htm .

Jon worked in construction for 10 years before starting his own local fireplace installation service 8 years ago. At his website, Jon will show you how his years of experience in the industry can help change your fireplace into the focal point of your home. To learn more about fireplace design ideas visit http://www.fireplacegate.com

Handyman Books

Building a Porch Swing

You can easily build a porch swing as a weekend project. There are many different kinds of porch swing plans and many different places where you can find them. When you browse home improvement magazines there are often plans to help you build this kind of swing with the list of materials and detailed instructions. Home improvement retail stores also sell kits that contain everything you need for the project. However, the greatest source for plans for a porch swing can be found on the many online sites and many of these plans are free for you to download and print.

You will need to have specific tools when you want to start building a swing for the porch. These include a planer, a bandsaw, hammer, a measuring tape and screwdriver or drill. Oak and pine are usually the recommended materials to use because they stand up well to the elements of the weather. There are designs available with a straight back and room to seat two or three people. You can also choose a design for two with separately curved backs that you can adjust to receive varying degrees of comfort when sitting.

In addition to the free plans you find online, some of the plans have comments written by those that have used them. By reading these comments you can get a better insight into how difficult a project it is if you do not have any carpentry experience. There may be comments about some users have modified the plans to suit themselves and this may be something that you want to do. Either way you will be able to use the plans to give you a porch swing that you will use for many years to come.

If you use a kit for such a building project, all the pieces will be cut to the specific measurements needed for the design. Otherwise, you will have to buy the lumber and cut the wood to the desired measurements. When using the plans, it is a good idea to enlarge all the drawings so that you have a template to use for measuring. Measure twice and cut once is a good rule to use to make sure that you have all the pieces in perfect proportion.

For more information on porch furniture, porch plans and related topics, visit AboutPorches.

Selecting the Right Contractor for Renovating your Home

Home renovation has become quite the trend nowadays. It is not like the time when renovation was looked upon as big a headache as buying new property and moving to a different city. This creates a problem. For those property owners who are not in the property business it can be tricky to find the right building contractor to work with. Quite often the only way to choose one is to ask around for a recommendation. Even then it is possible that things make not work out as smoothly as you wish. So how are you to avoid a situation like that? Here are some suggestions that should help.

First off you should have a list of around 3-5 contractors handy. Do not go with one. Get as many recommendations as you can. Collect quotes from every one and compare their prices against the services and their past record. All of them should be charging somewhere close to the going market rate for the job. If someone is charging way too low then expect corner cutting and a rush job. Similarly if someone charges way too high, then you are obviously being had. A good contractor will stick to the market prices and not demand unreasonable sums.

If you are going in for a minimal renovation then make sure you do not enter into a verbal agreement. It often happens that small projects are never put to paper and this leads to arguments later on. Always get the contract on paper and signed by both parties. Verbal agreements are worthless. Make sure you understand the contract yourself and that it covers everything you want done.

Another important thing is to speak to former clients of the contractors and get their feedback as to the performance during work and how much customer satisfaction the contractor gives. By speaking to others and listening to their experience with a contractor you will be able to choose the right one. If possible you should visit some of the locations where the contractor has worked recently so that you can see the quality of their work for real instead of through pictures.
An important thing that people often overlook is to actually check the references offered. Quite often the bottom line for their decision is the cost and not the reputation of the builder. Do not engage anyone who cannot show references unless you know them personally and when references are offered call them up and either speak to them or better still try and meet them and look at the work done in their home. This is a very critical component of choosing a contractor and you should not skip or avoid it. When you are checking references you must enquire about things like quality, time taken, schedules met or missed, builder's attitude, budget control, and so on.

Another thing to check is the builder's credentials. Not all states require a builder to be licensed. Reference checking becomes even more important in those states. In the others you must make sure the builder is licensed for the work to be done. Also check the builder on the Better Business Bureau to see if there have been any complaints.

William King is the director of Dubai Property & UAE Property & Dubai Real Estate Portal, Pakistan Property & Pakistan Real Estate Properties Portal and UK Wholesalers Dropshippers & Trade Suppliers Directory He has 18 years of experience in the marketing and trading industries and has been helping retailers and startups with their product sourcing, promotion, marketing and supply chain requirements.

Home Remodeling Books

Planning Your Bathroom Remodel Budget - Home Improvement Ideas

As a bathroom remodeling contractor, I get calls from people, that have no idea what they want or how much anything is going to cost. Here's some simple tips that can be very helpful when planning a bathroom remodel budget.

Bathroom Remodeling Investment

In 2008, the average mid-range bathroom cost around $16,000 and you could recoup around $12,000 of your original investment upon the sale of your home. According to a popular remodeling magazine, larger bathrooms using expensive fixtures, tile, bathtubs, woodworking, toilets and showers had an average of $52,000. Upon the sale of a home, you could recoup around $36,000 of your original investment.

Finding out How Much Things Cost

My first suggestion, would be to visit your local home improvement center, lumber yard or plumbing supply warehouse. Larger stores like Home Depot and Lowe's, seemed to provide you with value pricing but don't have a large selection. While doing some research on the Internet I noticed that some of their pricing is outrageously, outrageous. Some plumbing supply warehouses can provide value but beware others won't.

Create a List of Bathroom Remodeling Parts

You can get a good idea of your bathroom remodel costs for your budget by making a list of bathroom parts with pricing and then adding them up for a grand total. If you're a total bathroom remodel budget is $15,000 and you have a $6,000 bathtub with $4000 worth of tile, you could have a budget problem.

Figuring out the Labor

You will have to contact a contractor to get an actual cost for the labor. Sometimes you can double the cost of your bathroom remodeling parts to get a rough idea. If you have a list or a couple of lists and a few pictures of some sample bathrooms, this will make the contractor's job easier and often they can give you a labor price within a few days.

Give Yourself a Cushion

I would suggest leaving yourself a small financial cushion for any additional remodeling items. For example, you could see a different toilet, or instead of painting the walls, you now choose to wallpaper, you could incur additional expenses that you haven't planned for. If you know exactly what you want and stick to the original bathroom remodeling plan, you shouldn't need the cushion.

Financial problems often transfer into construction problems, so spend some time figuring out, how much money you want to spend on the bathroom remodel and try not to go overboard on the budget. I hate to see homeowners struggling with home improvement loan payments. Try to create a bathroom remodeling budget that is realistic and will not create a financial burden upon you or your family.

Greg Vanden Berge is working on the internet to promote the education for creating simple to follow guides and home building books to help professional building contractors as well as the weekend warriors. He has just finished a home buyers guide to take some of the frustration out of home shopping.

If your looking for some more bathroom remodeling or home building ideas.